|
|
Build Your Online Product Catalogs?
| Product Name: |
Ultra wide and long customizable aluminum veneer 1.8x7m
|
| Supply Ability: |
100000m2 |
| Related proudcts |
honeycomb panel, aluminum veneer, |
| Specifications |
customerized |
| Price Term: |
FOB,CNF,CIF |
| Port of loading: |
TIANJIN |
| Minimum Order |
50m2 |
| Unit Price: |
Negothiable |
|
Ultra wide and long customizable aluminum veneer 1.8x7m
The structure of aluminum veneer is mainly composed of panels, stiffeners and corner codes.
The size of the molded workpiece can reach 8000mm ˇÁ 1800mm (L ˇÁ W).
The surface coating is divided into fluorocarbon spraying, powder spraying, polyester paint spraying, fluorocarbon pre-roll coating.
The coating is made of well-known brands such as American PPG, Val***r, AkzoNobel, KCC, etc.
The coating is divided into two coatings, one baking, three coatings and two baking , Its coating performance reaches AAMA (American Building Manufacturing Association) and ASCA (American Building Spraying Association) AAMA2605-98 standards. Conventional.
thickness: 1.5mm, 2.0mm, 2.5mm, 3.0mm. Common specifications: 600 * 600mm, 600 * 1200mm
[Note] Other special thickness: specifications can be customized.
Aluminum veneer adopts 1100,3003,5005 aluminum alloy plate as base material.
Conventional thickness:1.5mm,2.0mm,2.5mm,3.0mm.
Commonly used specifications:600*600mm,600*1200mm
Aluminum veneer installation method:
1, according to the same horizontal height to load the edge corner.
2, according to different requirements have different skeleton, angle steel fixed, embedded aluminum pendant fixed, etc., according to different products have different fixing methods.
3, pre-installed on the fastener keel, together with the fastener keel attached to the light steel keel into a vertical direction buckle under the light steel keel, buckle plate keel ***cing according to the size of the plate to
***ermine, after all must be adjusted to the level.
4, the aluminum plate in the order of the keel, each piece of buckle, will be pressed down the reverse lock, the keel connection with the connector connection.
5. Gloves must be worn during plate mounting. If finger marks or stains are left carelessly, they can be washed and dried with ***ergent.
Features of aluminum veneer
1. Light weight, good rigidity, high strength 3.0mm thick aluminum plate weighs 8kg |
| Company: |
Tianjin Maynowei New Material Technology Co.,Ltd.
|
| Contact: |
Ms. lydia Guo |
| Address: |
6th Central AvenueŁ¬Economic Development North AreaŁ¬Jinghai,Tianjin,China |
| Postcode: |
|
| Tel: |
86-022-68687630 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
